E-RAB-To-Be-Setup-Item-HOReq  IE ( 27 )

If the eNB receives an E-RAB SETUP REQUEST message containing several E-RAB ID IEs (in the E-RAB To Be Setup List IE) set to the same value, the eNB shall report the establishment of the corresponding E-RABs as failed in the E-RAB SETUP RESPONSE with the appropriate cause value, e.g., “Multiple E-RAB ID instances”. If the eNB receives an E-RAB SETUP REQUEST message containing a E-RAB ID IE (in the E-RAB To Be Setup List IE) set to the value that identifies an active E-RAB (established before the E-RAB SETUP REQUEST message was received), the eNB shall report the establishment of the new E-RAB as failed in the E-RAB SETUP RESPONSE with the appropriate cause value, e.g., “Multiple E-RAB ID insta
Reference: TS 36.413-f10   View

Type:

  Sequence

Extension:

  MUST NOT

Value Length:

  0 .. *
Contained Information Elements

Name

Occurrences

Value Source

E-RAB-ID 1 .. 1 Dynamic
Transport-Layer-Address 1 .. 1
GTP-TEID 1 .. 1 Dynamic
E-RAB-Level-QoS-Parameters 1 .. 1 See source(s) of contained IEs
Data-Forwarding-Not-Possible 0 .. 1
E-RAB-To-Be-Setup-Item-HOReq-ExtIEs 0 .. 1

Containing Information Elements
E-RAB-To-Be-Setup-Item-HOReqIEs